A robot moves by turning its wheels. The driveAngle block specifies the amount of angle (in degrees) for the wheels to turn, which then drives the robot: Like with the driveDistance block, you can enter any integer value for the angle value in the driveAngle block. If the angle is positive, the wheels turn counter-clockwise, which drives the robot forwards. If the angle is negative, the wheels turn clockwise, which drives the robot backwards.
|
Drive the robot forward by rotating the wheels by 360 degrees, which represents one full wheel rotation. Click the More Info button to see how to calculate the distance it will travel. |
Drive the robot forward by rotating the wheels by 180 degrees, which represents one-half wheel rotation. Click the More Info button to see how to calculate the distance it will travel. |
Drive the robot forward by rotating the wheels by 720 degrees, which represents two full wheel rotations (because one full rotation is 360 degrees). Click the More Info button to see how to calculate the distance it will travel. |
Grid Size: S M L | Simple View: | MinView: |
![]() |
|
Coord: x-axis y-axis | Grid Lines: x-axis y-axis | |||
Grid: | 12x12 inches | 24x24 inches | 36x36 inches | |
72x72 inches | 96x96 inches | 192x192 inches | ||
1x1 inches | 2x2 inches | Fraction: | ||
xy-Range: | ||||
|
||||
|
||||
Quad: | 1 Quadrant | 4 Quadrants | 1&4 Quadrants | |
Units: | US Customary | Metric | Ruler: |
Labels: |
|
|
|
Font
px
|
|
Tics Lines: |
|
Width
px
|
Hash Lines: |
|
Width
px
|
|
|||||||||||
|
|||||||||||