RoboBlocky
PortalDocumentsCurriculum
Sign In
Learning Math/CS/Engineering Design with Robotics
Snow Flake Fractal 4
Grid Size: S M L Simple View: MinView:
Snow Flake Fractal 4
The pre-placed blocks drew the first few segments of the fractal. Add in the necessary blocks in nest loops formation to complete the fractal design. Remember, fractal is a never-end pattern, so try to see how much further can you complete this design. Play around to see if you can come up with other alternate designs.
Piano
Workspace Load Save C Prompt C Launch Console
50   51311.521.5-1.5turnLeft ▾(angle90°);driveDistance(distancein);driveDistance(distancein);repeattimesdoturnRight ▾(angle45°);driveDistance(distancein);repeattimesdoturnRight ▾(angle45°);driveDistance(distancein);repeattimesdotraceColor(, width);setSpeed(speedin/sec);5driveDistance(distancein);90turnLeft ▾(angle°);turnLeft ▾(angle90°);moveForward4driveTime(timesec);90driveAngle(angle°);34drivexyTo(xin, yin);34drivexy(xin, yin);010252*x+1drivexyToExpr(x0, xf, num,);driveArc ▾(radius, angle)53604setSpeed(speedin/sec);1delaySeconds(timesec);traceOn ▾();   traceColor();   4traceColor(, width);0.5traceOpacity();5right ▾(distancein);34directxyTo(x, y);34directxy(x, y);545directDistanceAngle(in,°);90direction(angle);model(Ladybug ▾);size(Medium ▾);100size(%);10change size by%flipModel();HellosayHello2sayforsecHmmthinkHmm2thinkforsecHellospeak100speak speed(%)voicefemale ▾languageEnglish ▾   setLEDColor();0.50.52blinkLED(high, low, blinks);colors ▾high ▾low ▾2blinkLEDColors(colors, high, low, blinks);2tempo(speed);playMelody(All Star ▾);playNote(C3 ▾,Half ▾);playNote(C3 ▾,1 ▾);2001setBuzzerFreq(hz,s);getxy ▾(x ▾, y ▾);getJointAngle(IDJOINT1 ▾,angle ▾);5driveDistanceNB(distancein);moveWait();90turnLeft ▾NB(angle°);turnLeft ▾NB(angle90°);4driveTimeNB(secondssec);90driveAngleNB(angle°);34drivexyToNB(xin, yin);010252*x+1drivexyToExprNB(x0, xf, num,);drivexyWait();driveArcNB ▾(radius, angle)5360driveArcWait();5rightNB ▾(distancein);34directxyToNB(x, y);34directxyNB(x, y);545directDistanceAngleNB(in,°);0.50.52blinkLEDNB(high, low, blinks);colors ▾high ▾low ▾2blinkLEDColorsNB(colors, high, low, blinks);blinkWait()playMelodyNB(All Star ▾);playNotesWait();driveForeverNB();stop();
Lock
roboblockyA44.ch
Time
00:00.000

Linkbot Labs

Firmware Update Needed

Arduino Update Needed

    Daemon: not connected
    Dongle: no dongle

    Linkbot Hub Manager

      Linkbot Firmware Updater

      Firmware Version 5.0.0

      Steps to Update a Linkbot:
      • Plug in a Linkbot to the computer with the micro USB cable (Make sure no other Linkbot or Dongle is connected)
      • Turn off the Linkbot if it is on.
      • Then turn on the Linkbot. The update will begin automatically.
      • When the progress bar reaches 100%, the update is complete and the Linkbot can be used.
      Steps to Update a Dongle:
      • Unplug all Linkbots and Dongles connected to the computer.
      • Plug the Dongle to the computer with the micro USB cable.
      • The update will begin automatically.
      • When the progress bar reaches 100%, the update is complete and the Dongle can be used.
      Progress: 0%

      Linkbot Arduino Updater

      Firmware Version 1.0.2

      Instructions for Updating Linkbot Arduino:
      • Plug an Arduino board to your computer.
      • Click "Start" button. Then wait the firmware is updated with 100% on the progress bar. To flash another Arduino, return to step 1.
      Progress: 0%